Courses may include
These are some of the courses offered in this program. It is not a complete list and courses are subject to change in advance of the academic year.
Recognizing prior learning / transfer credits
If you have previous learning (course, employment, etc...) that's relevant to your program, you may be able to apply to earn credit. Not all programs are eligible. Learn about our recognizing prior learning (RPL) process.
INDR 1010 - Industry Readiness
A crucial component of trade practice is the ability to share information. Explaining work, applying trade skills and meeting industry standards involves communicating effectively. This course introduces these skills with a trade focus and will help prepare students to contribute to employment and in the classroom. Course work may tie directly to projects and assignments happening elsewhere in the program and in its shops.
INDR 1020 - Working Effectively in the Trades
Almost all trades professionals will need to work well with others. Students in this course will learn to be effective team members and adapt and analyze how they share information with others. A selection of activities relevant to the particular trade will be used to practice collecting, analyzing and using trade information. Course work may tie directly to projects and assignments happening elsewhere in the program and in its shops.
SAFE 1000 - Introduction to WHMIS (Workplace Hazardous Materials Information Systems)
This course offers learners basic overview of WHMIS principles and establishes a solid foundation to support workplace-specific training on the safe storage and handling of controlled/hazardous products. Upon successful completion of the course, students receive basic WHMIS certification.
SAFE 1001 - Introduction to NS OH&S Act
This course offers students an introduction to the Occupational Health & Safety (OH&S) Act of Nova Scotia, which is required by any person employed in a Nova Scotia workplace. This is a generic, introductory course that provides basic knowledge of the Act for students and is considered to be the basis from which more specific training can be given.
SAFE 1020 - Safety Basics – Restricted Spaces
The learner is introduced to the basic requirements and procedures involved with working in restricted spaces. The definition and potential hazards of restricted spaces are discussed The course material is infused throughout the curriculum and may be delivered in the classroom, shop or other opportunity as designed and developed by the instructor.
SAFE 1021 - Safety Basics – Hazard Identification
The learners are introduced to the types of hazards encountered in workplaces and the approach that should be followed when recommending and implementing appropriate controls. Two key elements of Hazard Identification are addressed: Hazard Assessment and Inspection. The Nova Scotia Occupational Health and Safety Act is discussed. The course material is to be infused throughout the curriculum and may be delivered in the classroom, shop or other opportunity as designed and developed by the instructor.
SAFE 1023 - Safety Basics – Lock-out Tag Out
Lock-out Tag Out introduces students to the hazards related to energized systems and procedures to ensure worker safety. Related legislation and risk management is discussed and the student is exposed to the various types of lock-out devices. The course material is to be infused throughout the curriculum and may be delivered in the classroom, shop or other opportunity as designed and developed by the instructor.
SAFE 1025 - Certified Fall Arrest and Protection
This course provides participants with an understanding of the hazards associated with working from heights and compliance with Workplace Health and Safety Regulations (2013). Throughout the course, participants will gain experience in the donning of a harness, an overview and presentation of system components involved when working from heights and learn how to complete a fall calculation and emergency procedures.
UTLW 1000 - Safety and Due Diligence
The learner is introduced to the principles of the Nova Scotia Occupational Health and Safety Act (NSOHSA) as applied to the Utility Line Work field, as well as the knowledge and skills that is required to work safely in the real world environment. This course covers specific safety regulations and emphasizes the care and application of personal protective equipment as well as other safety concerns such as fire safety, confined spaces, work site cleanliness, traffic control, public safety awareness and the proper maintenance and storage of safety equipment.
UTLW 1002 - Ropes, Rigging and Personal Tools
In this course, learners will demonstrate an understanding of basic ropes and rigging practices used in industry. The learners will identify and apply safety factors, type and construction of rope and slings, upkeep, and proper storage. The importance of safe use of tools and equipment utilized in the field will be stressed throughout the program. This course will cover fall arrest systems and uses, and the regulations requiring their utilization. Learners will demonstrate the ability to test poles for safety regarding climb ability, climb poles and perform a variety of tasks while aloft. Learners will demonstrate the ability to perform one-person pole-top rescue. Throughout the course, learners will apply the knowledge and required skills to practical training and tasks facilitating the outdoor training facility.
UTLW 1004 - Utility Materials and Equipment
This course prepares the learner in the proper techniques to erect powerline poles and to apply framing materials on those poles. The learner will be given the opportunity to use to the various types of specialty tools used in the utility line industry including hot-line tools, voltage/amp/ohm meters, ladders and aerial personnel devices. This course will provide safety instruction and practical training on the operation of chain saws. Activities will be carried out in the outdoors training facilities.
UTLW 1005 - Line Protection and Grounds
This course will introduce the learner to the various types of equipment installed on transmission and distribution systems to provide line and electrical equipment protection from fault currents, including voltage control equipment, reclosers, switches and fuse protection. This course covers the selection, application, and maintenance of temporary grounds and equipotential shunts according to the Standard Protection Code. The outdoor training facility will be extensively utilized throughout this course.
UTLW 1006 - Conductors, Cables and Wires
This course introduces the various types and sizes of conductors and messenger/support wires utilized in overhead distribution and communication systems. The types of wire used in guying/support will also be covered, as well as the various standards applicable to the industry. The course will cover the basics of conductor installation and insulation, as well as the physical weights and tensions that may be applied to line structures and equipment.
UTLW 1008 - Service Entrance and 3-Wire Systems
The learner is introduced to the installation of three-wire service entrances in accordance with industry distribution standards. The requirements of services in regards to length, size of conductor, voltage, amperage, and type of entrance are discussed as well as the inspection of temporary service entrances to ensure personal and public safety and reliable electric power supply to the customer. The outdoor training facility will be utilized to demonstrate the installation and removal of service conductors, stressing the importance of safety and electrical continuity on the system neutral.
UTLW 1011 - Applied Mathematics and Electrical Theory I
This course includes a renewal and establishment of applied mathematical skills in preparation for the physical and electrical applications within the Powerline Industry. The learner will perform arithmetic and generalized mathematics to capture the quantitative aspects of electrical theory to inform their appreciation and scrutinize their understanding of the physical world in general and of electrical applications in particular and lay a foundation for further professional development within the electrical / communications field. The course includes topics of basic algebra, geometry, systems of equations, analytic geometry, vectors and phasors through to the examination of various functions. Study of atomic structure will lead to the examination of direct current, voltage, resistance and power, and their relationship within various circuit configurations. Energy, force, power and dimension will be related to the more physical aspects of the Lineworker’s trade. Alternating current theory will be introduced through a comparison with DC theory augmented with the concepts of magnetic and electric fields as well as its generation and distribution. Topics include inductance, time constants, power factor, voltage drop and line losses.
UTLW 1017 - Transformer Theory and Application
This course covers the fundamentals of single-phase transformer theory, including operation, installation and connecting, loading, and schematic diagrams used within the powerline industry. Also covered is the relationship between voltage, amperage, and power to the operation and connection of single-phase distribution transformers. The awareness of possible back-feed occurrences, and the hazards associated with back-feed, will be stressed throughout this course, and, as with all safety issues, will be stressed throughout the program. Also covered are the hazards associated with transformers that may have been involved in a fault or may have shorted. The outdoor training facility will be utilized throughout the course.
UTLW 1018 - Powerline Practical Applications I
This course introduces many basic tasks that line technicians will use in the trade. It allows students to apply knowledge and skills gained in the first semester, stressing safety throughout. Learners will have the opportunity to practice and/or apply strategies and techniques learned in the classroom to industry tasks achieved through a variety of pole yard activities.
UTLW 2016 - Powerline Practical Applications II
This course builds on the practical skills gained to date and extends the range of trade skills practiced. Individual and team tasks will be completed in the pole yard and will to apply learning gained in previous courses. Safety will be stressed at all times.
UTLW 2017 - Applied Mathematics and Electrical Theory II
This course is a continuation of UTLW 1001 and will further develop alternating current theory through a closer examination of the combined effects of electrical and magnetic fields already introduced as well as its generation and distribution. Topics include inductance, capacitance, time constants, power factor, voltage drop, line losses as well as transformer theory. Energy, force, power and dimension will be related to the more physical aspects of the powerline industry.
WORK 1100 - Workplace Mentoring I
This unit of instruction is designed to assist learners in managing their learning as an apprentice in the workplace. Learners will study their own experiences with learning new skills and identify their own learning preferences as an aid to developing learning strategies.
Power and Utility Line Work - Work Experience Requirement
